Tools
VW-specific tools.
Starter Motor Bush Puller Tool
For use with 12V starter motor bushes only.
- Part No:
- DE 002 016
- For:
- 12V only
Unavailable
Oil Filler Nut Tool
Tool for removing the oil filler nut.
- Part No:
- DE 002 005
- From:
- EMPI
Crankshaft Pulley Puller Tool
For removing the crank pulley. Can be used while the engine is still in the car.
- Part No:
- DE 002 017
Unavailable
Oil Pump Puller Tool
Prevents damage to the pump or crankcase when removing the oil pump..
- Part No:
- DE 002 023
Oil Piston Puller Tool
For removal of oil relief valve pistons.
- Part No:
- DE 002 010
Crankcase Splitter
Fits into the hole left by the oil pump to help split stubborn cases.
- Part No:
- DE 002 012
Crankshaft Measuring Tool
- Part No:
- DE 002 007
- From:
- CSP
- For:
- Type 1 Engines
Unavailable
Crankcase Measuring Tool
- Part No:
- DE 002 006
- From:
- CSP
- For:
- Type 1 engines
Unavailable
End Float Tool
For use with feeler gauges to measure end float.
- Part No:
- DE 002 003
Adjustable Pushrod
Used to measure the length of pushrod needed for correct valve geometry.
- Part No:
- DE 002 011
Lifter Retaining Clips, Pair
Holds the lifters in place while assembing an engine.
- Part No:
- DE 002 002
Cylinder Head Assembly Tool
Allows you to easily remove valves from Type 1 heads.
- Part No:
- DE 002 013
Unavailable
Torque Tool, Flywheel and Axle Nuts
Torque multiplier tool for gland nuts and axle nuts. For 6V and 12V flywheels and including an adapter for 4 and 5 lug wheels.
- Part No:
- DE 002 004
Deck Height Measuring Tool
Allows you to measure the distance from the top of the piston to the top of the cylinder. Used when calculating compression ratio.
- Part No:
- DE 002 015
Combustion Chamber Measuring Tool
For measuring combustion chamber volume.
Includes syringe and three plexi-glass discs to fit common bore sizes.
- Part No:
- DE 002 019
