Cooling System
Cooling system, tinware, fans and thermostats
Doghouse Oil Cooler Sealing Tins
Doghouse Oil Cooler Sealing Tin
Also known as "The Hoover Bit", this cooling tin replicates the original factory part by sending vital cooling air through the oil cooler where it's needed - keeping engine oil temperatures normal for increased engine longevity.
Without this part much of the vital cooling air will pass between the gap left between the oil cooler and the doghouse rather than flowing through the oil cooler.
- Part No:
- DE 117 001
- From:
- Zwerks
Unavailable
Venturi Rings
Venturi Ring
To get the maximum possible cooling out of your VW engine tin, add this venturi ring (also called a velocity ring).
- Part No:
- DE 119 001
- From:
- Awesome Powdercoat
Lower Tinware
Industrial Shields
Industrial Shields
Awesome Powdercoat's version of the VW factory Industrial Shields for engines without heat exchangers.
- Part No:
- DE 119 004
- From:
- Awesome Powdercoat
Fan Shroud Thermostat Flap Springs
Fan Shroud Thermostat Flap Spring
- Part No:
- 113 119 279
- For:
- 1200 - 1600 Type 1 engines.
Unavailable
Pressure Springs
Factory Rebuilt Thermostats
Used German top and bottom fittings installed on brand new phosphor-bronze bellows and filled with the correct liquid for expansion at the stated temperature.
Factory Rebuilt Thermostat, Type 1 with Carburettor
- Part No:
- DE 119 008 A
- For:
- Type 1 engines with carburettor. Opens at 65 - 70 C.
Factory Rebuilt Thermostat, Type 1 with Fuel Injection
- Part No:
- DE 119 008 B
- For:
- Type 1 engines with fuel injection. Opens at 80 - 85 C.
Factory Rebuilt Thermostat, Bay Window Bus with Type 4 Engine
- Part No:
- DE 119 008 C
- For:
- Bay Window Bus with Type 4 engine. Opens at 85 - 90 C.
Factory Rebuilt Thermostat, Porsche 356
- Part No:
- DE 119 008 D
- For:
- Porsche 356. Opens at 23 - 34 C.
Cylinder Head Deflector Tins
Cylinder Head Deflector Tin
Forces cooling air to circulate over the fins on the underside of the head.
Reproduction of the original Volkswagen part. With thermostat rod hole.
Sold as a pair.
Made in Canada by Zwerks.
- Part No:
- DE 101 001
- From:
- Zwerks
Alternator Backing Plate Tinware
Alternator Backing Plate Tinware
Alternator backing plate 3-piece kit.
- Part No:
- DE 119 007
- From:
- Taiwan
Accelerator Cable Grommets and Plugs
Pre-Heat Tinware Insulation
Air Deflector Plate
Tinware Screws
Tinware Screws, Stainless Steel
Stainless steel tinware screws and "Form C" washers.
- Part No:
- DE 119 005
Cooling Fans
Fan Hardware
Fan Hardware Kit
Includes the hub, nut and special washers to install the cooling fan.
- Part No:
- DE 119 006 E
- From:
- EMPI
Unavailable
Fan Belts
Fan Belt, 9.5 x 905mm
- Part No:
- 111 903 137 D
- For:
- Beetle / Ghia to 73, Bay Window Bus to 73 (with Type 1 engine). For engines originally fitted with a dynamo.
Fan Belt, 11 x 912mm
- Part No:
- 111 903 137 E
- For:
- Beetle / Ghia from 73, Bay Window Bus from 73 (with Type 1 engine). For engines originally fitted with an alternator.
